Wednesday, October 30, 2019

Eutrophication Term Paper Example | Topics and Well Written Essays - 2000 words

Eutrophication - Term Paper Example The Eutrophic waters favor quickly developing plants and algae's. These long living species cannot resist competition and develop into oligo or mesotrophic waters which make these waters of less interest in terms of biodiversity and ecological quality. Thus they die of indigestion. The process of eutrophication is clearly described by the following figure; The main cause of eutrophication is large input of nutrients to the water body and its effect is on imbalance of the food web which results in high levels of phytoplankton biomass in stratified water bodies. This can lead to algal blooms. The direct consequence is an excess of oxygen consumption near the bottom of the water body. Additional factors supporting this process are Along with carbon, oxygen and hydrogen which plants get from water they also need nitrogen and phosphorous which are necessary for the development of aquatic life thus during eutrophication the concentration of nutrients in the water changes, phosphorous is usually a limiting factor for phytoplankton in fresh water, large marine areas have nitrogen as limiting nutrient especially in summer. Intermediate areas such as river plumes are often phosphorous limited during spring. Once eutrophication is detected in the water body it is considered sensitive under the European Union Urban waste water treatment directives and is declared nitrate pollutant according to the Nitrate directive and is an indicator of disturbed ecosystem. A healthy ecosystem is the ecosystem that functions well and is able to resist or recover from disturbance. The organization of the ecosystem refers to the food web and the biodiversity; ecosystem resistance is the non-response, up to a certain extent, of impacts such as nutrient enrichments. The ecosystem elasticity refers to the ecosystem ability to survive through the applied pressures. Although all these ecosystem characteristics contribute to the ecosystem health and integrity, they induce a non-linear response to the ecosystem which complicates the quantification of the assessment. The initial effects from eutrophication are negligible as they are below the carrying capacity: any measurable effects are less pronounced than seas onal fluctuations and therefore, any assessment seems to be uncertain. As the phenomenon of eutrophication is getting established, changes in mean nutrient and chlorophyll concentrations as well as changes in the community structure become obvious. This stage can be the early warning for the ecosystem quality. Causes Human activities are main cause of eutrophication all around the

Monday, October 28, 2019

Holdens Passive and Unwillingness Essay Example for Free

Holdens Passive and Unwillingness Essay Holden is the protagonist in the novel, Catcher in the Rye by J.D. Salinger (1945). Holden is a character who tries to seek for dignity, but he has some flaws holding him back. Holden is passive and unwilling to examine himself and seek his own dignity. Three reasons for his tragic flaw are: his craziness, his immaturity, and his phoniness and madman stuff. The first reason for Holden’s flaw is his craziness. He acts this way because he is not normal like others. Something that he repeats constantly throughout the novel is, â€Å"He is the biggest phony.† This quote shows how Holden thinks and acts towards others. Holden acts this way because who falls in love too quickly with Jane and Sally. He also thinks this way because Jane and Sally equal perfection and he isn’t perfect like them or anybody else. Finally his thoughts are what can he do to be perfect like everyone else because he seems to be the only that is crazy. Therefore, Holden acts and thinks differently from everyone else because he is insane. The second reason for Holden’s flaw is his immaturity. He acts this way because Holden is always alone and have no family to support him except his younger sister, Phoebe. Something that is repeated constantly throughout the novel is, â€Å"Jane keeping her kings in the back row.† This symbol shows that Holden cannot separate the past from the present time. Holden thinks this way because he was always necking with Jane when they were young. He also thinks this way because of his immaturity of always wanting to have sex and always wanting to be a kid instead of growing up to is an adult. Finally his thoughts always want to be with Jane, but because of his immaturity Jane doesn’t choose him. Therefore, Holden acts immature towards others because he has been expelled from four different schools and no one is there to teach him his manners and to discipline him. The third reason for Holden’s flaw is his phoniness and his madman stuff. He acts this way because he doesn’t want to get help. Something that Holden repeats constantly in the novel is, â€Å"I’m a madman.† This quote shows that he has some personal issues going on with him, but he doesn’t want to get help. He thinks this way because his other lover, Jane is going out with others, but not him because he is a jealous person. He also thinks like this because it shows his low-self esteem and his view towards women. Finally his thoughts are I’m a madman because he is inexperienced with women. Therefore, Holden is a madman because of his jealousy toward women and never did have a real relationship with any women before. In conclusion, Holden is passive and unwilling to examine himself and seek his own dignity. Three reasons for his tragic flaws are that he is crazy, he is immature, and his phoniness and his madman things. Holden acts crazy because he is not normal like others and isn’t perfect at everything. He acts immature because no one is there to teach him his manners and no one is there to also teach him his respect and manners. Holden also acts like a madman because he is jealous of Jane and Sally. He also acts like this because he doesn’t like the private schools that he goes to. Therefore, I think that Holden needs to go get some serious help to become a good and a better person.

Saturday, October 26, 2019

edgar allan poe :: essays research papers

American poet, a master of the horror tale, credited with practically inventing the detective story. Edgar Allan Poe was born on January 19, 1809 in Boston, Massachusetts, to parents who were itinerant actors. His father David Poe Jr. died probably in 1810 and his mother Elizabeth Hopkins Poe in 1811. Edgar was taken into the home of a Richmond merchant John Allan and brought up partly in England (1815-20), where he attended Manor School at Stoke Newington. Never legally adopted, Poe took Allan's name for his middle name. Poe attended the University of Virginia (1826), but was expelled for not paying his gambling debts. This led to a quarrel with Allan, who later disowned him. In 1827 Poe joined the U.S. Army as a common soldier under assumed name and age. In 1830 Poe entered West Point and was dishonorably discharged next year, for intentional neglect of his duties. Little is known about his life in this time, but in 1833 he lived in Baltimore with his father's sister. After winning a prize of $50 for the short story "MS Found in a Bottle," he started a career as a staff member of various magazines, among others the Southern Literary Messenger in Richmond (1835-37), Burton's Gentleman's Magazine in Philadelphia (1839-40), and Graham's Magazine (1842-43). During these years he wrote some of his best-known stories. In 1836 Poe married his 13-year-old cousin Virginia Clemm. She burst a blood vessel in 1842, and remained a virtual invalid until her death from tuberculosis five years later. After the death of his wife, Poe began to lose his struggle with drinking and drugs. He addressed the famous poem "Annabel Lee" (1849) to her. Poe's first collection, Tales of the Grotesque and Arabesque, appeared in 1840. It contained one of his most famous works, "The Fall of the House of Usher." During the early 1840s Poe's best-selling work was The Conchologist's First Book (1839). The dark poem of lost love, "The Raven," brought Poe national fame, when it appeared in 1845. The Murders in the Rue Morgue(1841) and The Purloined Letter are among Poe's most famous detective stories.

Thursday, October 24, 2019

Athenians and Spartans :: essays research papers

The Spartan and Athenian civilizations carried on conflict from 431 to 404 B.C. (Bunson 195). Twenty seven years of blood shed and fighting was carried on between these peoples and their allies that were involved. The first ten years of the war was fighting and often called the Archidamian War after the Spartan king Archidamus II, following the fighting was the Peace of Nicias in 421 B.C., after this was eight unstable years of peace and more fighting, followed by the Ionian War (Bunson1277). These two civilizations were nothing like each other however some of their warfare techniques must have been similar to have fought for so long. The Spartan civilization was one that focused on physical and military power rather than academics (Jones 153). While men were still young they were taken from their families and went to a school that taught military training. If any men didn’t participate in this training their citizenship was denied to them. By the 6th century B.C. the Spartan army was known as the most efficient fighting force in Greece, the army consisted of 5000 people which were all citizens (Jones 154). Sparta was able to do this because their farming was done by subservient workers known as â€Å"captives† who were forced to do work on the land (Jones 154). By doing this the citizens were able to be fully devoted to their military. Unlike the Spartan civilization that was so focused on the military the Athenians were more involved with bringing culture and art into their lives. They were famous for their pottery with geometric designs, they also created the first outlines of the human body which would later bring them artistic achievement (Meiggs 193). During the 7th century B.C. there was much emphasis put on the craftsmanship and handicraft work that was being developed (Meiggs 193). One known figure in Athens that increased the culture was Pisistratus an able politician, he was responsible for opening up the city to Ionian philosophical and artistic influences. Also he made the first recording of the Panathenaea, a major collection of religious worship. Also because of other abled politicians and generals such as Aristides, Cimon, and Pericles Athens prospered for 50 years in political, artistic, philosophical and financial spheres (Meiggs 192). However this changed when in 431 the Peloponnesian War began because of Sparta’s uneasiness with the expansion on Athens ( Meiggs 195). The Athenians and

Wednesday, October 23, 2019

“His fiend-like queen” Does this seem a fitting judgement of Lady Macbeth? Essay

Upon beginning the play, one first believes that Lady Macbeth does indeed possess the evil, inhumane characteristics of a fiend. Within minutes of reading Macbeth’s letter, in which he informs her that according to the prophecy of the witches’ he is a â€Å"king that shalt be†, she contemplates regicide, in the belief that â€Å"fate and metaphysical aid doth seem to have [Macbeth] crown’d withal.† Though this introductory scene portrays her as â€Å"fiend-like†, despite condemning Macbeth for being â€Å"too fill o’ the milk of human kindness†, she herself is worried that â€Å"compunctious vistings of nature† will † shake [her] fell purpose† of murder. She then turns to demonic spirits, calling them to â€Å"fill [her] from the crown to the toe full of direst cruelty.† It is the feminine traits of compassion and fallibility often attributed to women of the Jacobean era that causes to Lady Macbeth beg the spirits to â€Å"unsex [her] here [†¦] and take [her milk for gall]†, for women’s capacity for cruelty was considered to be inferior to that of men. Lady Macbeth is fully aware of her weaknesses both as a human and especially as a woman that may â€Å"impede [them] from the golden round.† From this we see that Lady Macbeth is not naturally evil, for she calls upon the supernatural to aid her in the murder they are planning to commit. This is also shown in terms of language, for Lady Macbeth speaks in iambic pentameter, which conveys the human heart beat. This is in contrast to the non-human, fiendish, witches who use a different verse form. Therefore Lady Macbeth’s verse shows that not only is she human, she, unlike the demonic, has a heart. Though it is Lady Macbeth, through seductive verse, emotional blackmail and her powers of manipulation, who finally persuades Macbeth to kill Duncan it must be remembered that murder was not, initially, the idea of Lady Macbeth. It was Macbeth who, on the fulfilment of the first prophecy of the witches, entertains â€Å"horrible imaginings† of â€Å"murder yet [†¦] fantastical.† As a woman, it is true that Lady Macbeth was only able to achieve success through her husband and, perhaps, she may have exploited his weaknesses in order to gain power. Nevertheless, from a different perspective, it may appear that Lady Macbeth simply encouraged and supported her husband’s ambition, for it is Macbeth himself who satisfies his â€Å"black and deep desires† by killing Duncan. It is also evident that though Lady Macbeth may be â€Å"fiend-like† in word, she appears to be quite human in her actions. For Malcolm’s judgement on Lady Macbeth seems utterly justified when she talks of â€Å"the babe that milks [her],† for she claims that even â€Å"while it was smiling in [her] face/ Have pluck’d [her] nipple from his boneless gums,/And dash’d the brains out, had I so sworn†. It follows that â€Å"fiend-like† is a true description of her character, for it is only an evil, inhumane fiend who would murder an innocent and helpless baby. However, Lady Macbeth soon reveals her inconsistency when she confesses that she would have murdered Duncan â€Å"had he not resembled [her] father as he slept†. From this comment we see that Lady Macbeth is more humane than she would like to believe. She also claims that she has known â€Å"how tender ’tis to love the babe that milks [her]†. Lady Macbeth has experienced love and this love must still remain, for it is her love for her father that stops her killing Duncan. Therefore Lady Macbeth cannot be fully fiend-like as she possesses the decidedly human quality of love. Paranoia causes Macbeth, against his wife’s wishes, to hire murderers to kill his former friend Banquo, and his son Fleance. Lady Macbeth feels that â€Å"[their] desire is got without content† and begs her husband to â€Å"leave this† when he hints at disposing of Banquo. He ceases to involve his â€Å"partner of greatness† in his plans and she is evidently no longer dominant in the relationship. Instead Lady Macbeth is now in the position which befitted a Jacobean wife, for, according to prevalent Christian belief, the husband was the head of the family. Whereas Macbeth appears to no longer possess a conscience, Lady Macbeth is plagued by hers. She sleepwalks regularly, for â€Å"unnatural deeds do breed unnatural troubles† and is afraid of the dark, having â€Å"a light by her continually†, even carrying a candle whilst sleepwalking. This is in contrast to the time when she called â€Å"come thick night†; she is afraid of the darkness which she once summoned. She, who scorned Macbeth when he feared that regicide will cause them to â€Å"jump the life to come†, now fears eternal damnation. She pleads with the damning guilt to leave her, crying â€Å"out, out damned spot†. In her disturbed sleep she instructs herself to â€Å"wash your hands†, in the hope that â€Å"a little water will clear [them] of this deed. However, it is soon clear that Macbeth’s fear as to whether â€Å"all great Neptune’s ocean wash this blood/Clean from [his] hand† is not unfounded, for Lady Macbeth soon despairs that â€Å"these hands [will] ne’er be clean.† Earlier in the play Lady Macbeth is shown to be a master of language in her manipulation of Macbeth. Due to her distressed state of mind she has lost the ability to speak in verse and instead uses distracted prose. At one point her language breaks down to doggerel, on her remembrance that â€Å"the Thane of Fife had a wife†. Lady Macbeth is no longer aware of her surroundings, as her mind recalls the various murders of Duncan, Banquo and the Macduffs. It is difficult to ascertain whether at times she is talking to herself or to Macbeth, for she is evidently in conversation with someone, exactly who is not clear, though she makes one reference to â€Å"My Lord†, Macbeth. Her insanity is also shown by her the inconsistency of her speeches and her total disregard for chronology, for she confuses the order of the murders as well as the present with the past. Her parting words recognise the hopelessness of her situation, for she knows that â€Å"what’s done cannot be undone†. This also shows that, unlike her husband, Lady Macbeth feels remorse for their actions. She is sorry that their actions â€Å"cannot be undone†. Macbeth, on the other hand, shows no sign of regret, for he feels that he is â€Å"in blood/Stepp’d in so far, that should [he] wade no more, /Returning were as tedious as go o’er.† Murder, including that of innocent, women and children are part of course with him. A distraught Lady Macbeth begs â€Å"No more o’ that my Lord, no more o’ that†, for memories of the murders serve only to torment her, though it is she who earlier unfeelingly remarked that â€Å"what’s done is done† with the belief that â€Å"things without all remedy/Should be without regard†. Her guilt has driven her to near insanity and her conscience is so disturbed as to confuse her mental faculties. Eventually, Lady Macbeth â€Å"by self and violent hands/Took off her life† for Lady Macbeth is unable to bear the burden of guilt any longer and suicide appears to be her only option. According to Jacobean belief, suicide led to certain damnation, and Lady Macbeth’s untimely end is evidence of her despairing of hope in the next life, for she will now â€Å"jump the life to come† having resigned herself to â€Å"deep damnation.† This, if anything, is proof that Lady Macbeth is not â€Å"fiend-like†. Lady Macbeth regrets their actions, begging her husband to cease his murdering, a sign that unlike her husband, she still possesses a morsel of humanity. Lady Macbeth is by no means evil, for evil has no conscience, whereas the conscience of Lady Macbeth is very much in evidence As an audience we witness, through the medium of the stage, the breakdown of Lady Macbeth. We watch her eventual unravelling, from her initial ambitious determination to murder the king, to her final, desperate act of suicide. We gradually realise, that Malcolm, blinded by the knowledge that Lady Macbeth was instrumental in his father’s death, is too harsh in his judgement of her. By showing signs of remorse, not to mention an unwillingness to kill Duncan and an inability to be cruel without aid, Lady Macbeth proves that she has not the evil of a fiend. She is certainly not without conscience, having been tortured by guilt, nor is she without feeling, for she has known â€Å"how tender ’tis to love†. I conclude, therefore, that though Lady Macbeth is not, by any stretch of the imagination, a â€Å"gentle lady†, she is certainly no fiend. Though, at the beginning of the play she may have appeared to be as evil and inhumane as a fiend, by its closing, she is seen to be a wretched, desolate woman who deserves our pity.

Tuesday, October 22, 2019

Working With Native Americans in a Social Work Setting essays

Working With Native Americans in a Social Work Setting essays Certain aspects of Native American cultures may affect the process and outcome of Native Americans who seek out assistance from social workers. The values and norms inherent in many Native American cultures often present unique circumstances when individuals from those cultures deal with the dominant culture. There are at least 550 different Native American tribes in the United States, and within those tribes are unique and distinct cultural variables to assess. Because all of those tribes combined are broadly defined as Native Americans, and for the purposes and scope of this paper, the information discussed is in reference to those hundreds of tribes as one set of cultures commonly referred to by the dominant culture as American Indians or Native Americans. As with most cultures, the Native American culture has its own set of values (different tribes have their own specific and independent set of standards which can vary greatly in certain aspects ). American middle -class and American Indian cultural values differ in major areas . How individuals in these two groups view mans relationship with nature, relations with people and time are actually opposite. According to Giordano, McGoldrick and Pearce (1982), Middle -class Americans attach value in having control over the environment/nature while Native Americans value being in harmony with nature. Native Americans are more concerned with the group rather than the individual, whereas middle-class Americans value the individual. In regards to time orientation, Native Americans view daily life as situated in the present, past and then future; middle-class Americans view it future, present , past. There are about 2.3 million Native Americans in the United States, accounting for just 0.9 percent of all Americans (Russell, 1996). The National Census reported in 1990 that nearly half of natives living on reservations were living below the standards con...

Monday, October 21, 2019

Next Generation Plm an Integrated Approach for the Product Lifecycle Essays

Next Generation Plm an Integrated Approach for the Product Lifecycle Essays Next Generation Plm an Integrated Approach for the Product Lifecycle Essay Next Generation Plm an Integrated Approach for the Product Lifecycle Essay Proceedings of ICCPR2007: International Conference on Comprehensive Product Realization 2007 June 18-20, 2007, Beijing, China Next Generation PLM an integrated approach for the Product Lifecycle Management Julius D. Golovatchev 1 Oliver Budde 2 1) Detecon International GmbH, Managing Consultant for Enterprise Effectiveness PLM, Bonn, Germany 2) Research Institute for Operations Management at RWTH Aachen University, Germany Abstract: Consistent definition, categorization and operation of products (e. g. extended products, bundles, etc) delivered to global markets and customized for ifferent buyer segments is one of the major challenges for the Lifecycle Management. Each lifecycle encompasses the processes, information, support systems and people involved in delivering the related business functions. It can be argued that process supporting technologies/solutions like WFMS, PDM-System etc exist today for the creation of a seamless environment for accessing, ma nipulating and reasoning about product information that is being produced in fragmented and distributed environment. A holistic approach that is suitable for aligning the Product Lifecycle Management (PLM) business requirements (like process flexibility, horter time to market etc) to the potentials of new technology driven concepts in the information management like SOA is nevertheless still missing. The authors give reasons why the holistic view on the product lifecycle management as well as the link between an inter-company wide information management is critical for an efficient PLM and present an integrated approach taking these aspects into account. In this paper four building blocks of Next Generation PLM are introduced. The PLM Meta Model makes up the first building block. It defines the constraints and rules for decomposing the roduct functionality into meaningful modules. The PLM IT-Architecture represents the second part and describes the IT-components and their interrelat ion utilized for the purpose of PLM. A PLM-Process methodology as a basis for describing the relevant activities is attached in the third building block. The final building block is constituted by the Lifecycle Value Management concept for steering the PLM- process on a strategic level like, among other things, by considering portfolio effects. The paper closes with the presentation of a short case study validating the proposed concept for a company in the ervice industry. Keywords: PLM, product lifecycle management, extended product, integrative approach, lifecycle value management 1. Motivation As Shark (2004) postulates, Product Lifecycle Management (PLM) is the activity of managing a company’s products across the complete lifecycle, from the early stages of conception to the final disposal or recycling of a product. From this definition, a strong interrelation between the value creation process and the PLM of the company can be deduced. Taking the current globally changin g business environment into account the PLM can be considered as a strategic weapon for enabling he company to provide an additional value to customers and thereby gain a competitive advantage over their competitors. Especially in the telecommunication industry, which experienced a significant change in its environment during the last five years, PLM is considered to be essential for facing ever shorter innovation cycles (Wohler-Moorhoff et al. , 2004). In the following two sections, we introduce the main business drivers, which currently have the most impact on a company’s business model and are expected to do so in future. For each business driver specific PLM-relevant challenges can be derived. These challenges will be pointed out in detail in the last section of this chapter and will serve as motivation for our integrated PLM- approach in chapter 2. The validation of this approach is the goal of chapter 3 by introducing a case study. (1) Business Drivers Business Driver One: Management of the Extended Product The dichotomy between tangible goods and immaterial services is subject to change according to Saaksvuori (2004). In the service industry as well as in the traditional industries like manufacturing this development towards a hybrid or extended product can be observed. (Figure 1) Fig 1: Extended Product according to Thoben et al. , 2001 Following the argumentation of Mateika (2005) a critical success factor in the manufacturing industry is the ability to provide more profitable services in addition to the tangible good. But this combination of tangible and intangible attributes in terms of the extended product increases the complexity in managing the Product Lifecycle. (Saaksvuori, 2004) Another concomitant phenomenon of the so-defined extended product is the focus-shift to a horizontal integration along the value chain (Teresko, 2004), which can be achieved by considering product modularization oncepts. Business Driver Two: Globalization Global markets result in global competition that every company is confronted with. This barely new business driver forces companies to follow either a cost-leadership strategy by standardising their products or a differentiation strategy on a global scale by individualizing their products. In order to perform in the cost-lea dership role, companies have to implement efficient processes regarding the development of complex products and to handle the order management process. Simultaneously companies have to cooperate with numerous business partners, which results in a high effort or coordination. A product differentiation strategy implies processes that ensure short time-to-market on one hand and an effective degree of freedom in the process definition for staying innovative on the other hand. Business Driver Three: Legal Frameworks Increasing regulations such as safety, environmental and product reliability will influence company’s PLM- process. Especially the resulting effort for ensuring traceability will have an impact. Traceability has two dimensions in the PLM-context. First of all it is related to the PLM process itself. Effective measures have to be in lace in order to ensure the flow of transactions to identify where material misstatements due to error or fraud could occur (Sarbanes Oxley Act). Further, traceability in the order-delivery process is about tracking of an individual product units or even components. Legal frameworks like TREAD Act for the automotive industry in the USA or REACH for the chemical industry in EU can be subsumed under this dimension. Companies that need to respond to this kind of regulation must ensure that the implementation and the integration in the existing processes happen to be simple and at the least possible lifecycle costs. 2) Challenges Based on the outlined business drivers, challenges for companies can be derived for the strategy, the processes organization and the IT. An overview of these challenges is given in the following table. Tab. 1 PLM-relevant challenges Strategy Impact Impact on Processes Impact on IT Business Driver 1 Less vertical integration, more horizontal integration of the value chain Focusing on product modularization and utilisation of product platforms to enable the re-use of components Collaborative PLM-pr ocess with defined interfaces Process readiness for the management of complex products Data exchange standards IT-representation of complex products Integration of business applications Business Driver 2 Commitment to either a product individualisation or product standardisation strategy Improvement in the process automatisation Inter-company wide process standards Enterprise Application Integration with external business partner Workflow Management System Business Driver 3 Comply to regulations e. g. (Sarbanes Oxley Act, TREAD Act Support for traceability of products by standardised and well documented processes Support for traceability of processes Safeguarding data consistency Storage concepts for long-time archiving PLM is an essential component to support the value chain process in the company. In Aerospace industry, for instance, taking six month out of the development cycle can increase market share as much as 8% (Teresko, 2004). Due to the complex and multilayered challenges, that companies have to face, an isolated, non-integrative PLM-approach is not promising. Instead we recommend a more integrative approach that addresses the relevant dimensions of the PLM and thereby ensures an effective implementation. 2 Integrated PLM- Approach The integrated PLM- Approach consists of four components, depicted in figure 2. PLM-IT- Lifecycle- Value Management 4 Meta Model PLM Architecture PLM- Process Building Blocks Fig. 2: Four components constituting the integrated PLM-approach In the following paragraphs the different components are described further. (1) PLM Meta-Model Many present quality deficiencies in the product development (esp.. n the service industry) originate from a diffuse definition of products as well as from the inconsistent view on the object â€Å"productâ€Å". The product (or service) should be clearly and precisely defined to be developed, commercialized and to be understood from the customer. There should be a constant product definition ith the overall product lifecycle and for all business processes. The product as the main subject of the process needs to be defined and this definition should be taken from the customers? perspective. A product is an entity the customer perceives in its entirety and is characterized by being offered to a market place. It includes physical products, services and information (compare figure 1). The precise definition of the complete product range and their categorization still remain a problem especially in the service industry (eg. telecommunication, energy, finance industry etc. ). For example, in the elecommunication industry essentially four categories of products can be differentiated: market product (service), standard solution, customized (individual solution) and bundle. All offered products and services can be assigned to one of the mentioned categories. Product definition is not simply a reflection of the engineering design. It also includes the entire set of information that defines how the product is designed, manufactured, operated and managed on the market and finally withdrawed from the market. Product definition should be furthermore detailed by the company-wide specific PLM Meta-Model to decrease complexity costs. Such Meta-Model defines the product on an even more detailed level for the optimization of time to market and decreasing of resembling components PLM Meta-Model is the basis for standardization and modularization of products. Modular product data structure as core element of PLM Meta-Model ensures linking the sales perspective to the internal (production) perspective in relation to the offered products and services. The main aim of introducing a modular product structure is the optimization of the product development. and market Internal Portfolio branch Modules Components cat I Module cat †¦ in well management systems Realization systems and management Sales view production view Product Modules Module II †¦ †¦ Realization PLM as as stock in production order IT architecture: Product realization: PLM-Process Transfer payments Controlling: cost / revenue, product success accounting Production service: demand assessment, Marketing Portfolio invoicing target and regional resource planning and advance performance mgmt: structure Billing: Processes: input/ output, process quantities Fig. 3: Definition and requirements on product data structure The unique PLM Meta-Model and the corresponding processes should be implemented by considering the xisting processes, company structures, and cultures. Requirements from the affected functional areas flow into the definition of the product data structure. One master product data management fits all needs of the main processes and its interfaces. Using PLM Meta-Model leads to simplification and cost optimisation of â€Å"product engineering† throug h the re-use of the production modules, shorten â€Å"time-to-market†, avoiding overlaps in development and reduce technical variance, availability of the product modules range of all service lines (factories) for all division of the company etc. . (2) PLM IT-Architecture The foundation for moving a product through its complete lifecycle beginning with the product idea and ending with the product removal from the market is a solid PLM IT-Architecture, that is customized for the company-specific PLM- requirements. In our perspective, such a PLM IT- Architecture must support the PLM- process in the dimensions: (1) Decision support, (2) Operational support and (3) integration of supplemental business applications. A standardized off-the-shelf PLM-System is therefore not the tool of choice as Ausura and Deck (2007) point out. Instead we suggest to rely on a PLM IT- Architecture that re-uses, respectively ustomizes existing IT- components as far as possible. In the next paragraphs a description of the essential IT-components is given that build up the PLM IT- Architecture. Decision Support System (DSS): The main purpose of a DSS is to gather and consolidate data from operative systems in order to provide the senior management with aggregated information re garding the product lifecycle. The Computer Aided Selling (CAS) module provides functionality for the product configuration 1 and product pricing. The component Strategic Resource Management focuses on the long-term resource capacity planning on a strategic level. Product ortfolio management aspects are covered with the last Value Management component. Operational Support System (OSS) On the operational level the PLM- process execution is supported by the OSS. The Workflow Management Systems (WFMS) enables a higher degree of process automation. Especially in the context of distributing and releasing unstructured content like a product specification in cross-functional teams, the WFMS plays an essential role through a strong link to the Product Data Management System (PDM). The Product Modelling System and the PDM are closely coupled. The former defines the product structure, in which types of modules he product is decomposed into 2 . In the database context this functionality is sim ilar to the schema definition. The PDM-systems stores all product relevant data according to this definition and provides different views for each stakeholder e. g. marketing and engineering. The Multi-Project Management System as well as the Collaboration Tools are instruments for managing the product in different phases in a collaborative environment. Integration of supplemental business applications: A PLM IT- Architecture is supposed to hold the promise of seamlessly integrating and presenting all information roduced throughout all phases of a product’s life cycle to everyone in an organization, along with external business partners. For ensuring this functionality, an EAI-approach has to be implemented. According to recent research activities a Service Oriented Architecture (SOA) is most suitable to integrate the business applications from external partner e. g. suppliers as well as integrating the own business applications like ERP, CRM etc. in order to fulfil the promi se of seamless integration for becoming a real-time enterprise (Abramovici, 2002). Product-Marketing Management Exit Management CAS Strategic Resource Management Value Management Applications Supplier) Multi-Project- Tools Workflow- Product System Applications CRM CAD Decision System PLM- Process Business Customer) layer (Development Product Operational Support System Business (Management System Product-Data-Management System Collaboration Management Modeling System Business SCM ERP Support Applications (Integration-SOA) 1 The CAS module is also essential in the operative context for the order management. In our understanding CAS goes beyond the operative support and helps to steer the variant management in order to cope with the increasing product complexity nowadays. .For example hierarchies of assembly groups can be defined. Additionally constraints and rules can be modeled constricting the combination of specific modules. Fig. 4: PLM IT- Architecture building the IT-foundation of the PLM- approach (3) PLM-Process and Structure In this section the PLM-Process description will be introduced. The main design goals of this approach is to facilitate the execution of this collaborative process (efficiency goal) and equally important to align the activities with the strategic goals of the company (effectiveness goal). Our PLM-Process approach is based on three principles: Stage Gate Approach, Multi-Perspective, Metrics based Management. These principles are subject for further explanation in the following paragraphs. Principle One: Stage-Gate Approach The Stage-Gate Approach is both a conceptual and an operational model for the development, marketing and removal of a product during its life cycle. The PLM- Process consists of seven stages. This structure is oriented on the life cycle of the product and has been validated in several projects by Detecon Inc. primarily in the Telco-Industry. Every stage consists of a distinct number of activities (organized in perspectives, refer to the next ection), which have to be accomplished by specific process stakeholders at the given phase. The entrance to each stage is a gate; these gates control the process much like quality control checkpoints. Each gate is characterized by a set of deliverables as input, a set of exit criteria and an output. Gates are manned by senior managers that form the so-called Product Board. The Product Board acts as a gate-keeper that evaluates the results from one stage by a given set of criteria. Based on this evaluation, the product board can either decide whether the product idea proceeds to the next stage, e-starts at the previous stage or is archived. Principle Two: Multi- Perspective Product Lifecycle Management has always to cope with the conflict of objectives between the product marketing and the technical side. Several case studies have documented that this conflict often results in product failure in the market. Either because the product specification is too much technical driven and therefore far from the market demand or the product marketing has defined product specifications without collaborating with the technical department about technical feasibility beforehand. For solving that conflict of objectives three erspectives on the process have to be taken into account in order to ensure an efficient coordination and collaboration of the relevant d epartments or business partners. In the market perspective all activities are assigned to that relate to the product marketing. Referring to the service industry, typical tasks like the definition of product specifications and the management of the product on the market-place belong into this category. By contrast the technical perspective subsumes all technical or production- oriented activities. Additionally the financial implications of moving the product through the life cycle re grouped in the financial perspective. Principle Three: Metrics based Management In addition to the process definition the organisational component must not be neglected. Since products, and consequently the PLM-process, become more complex and involves internal as well as external partners along the value chain, there is a greater need to balance top- management control with the empowerment of self-managed, cross functional teams. As a prerequisite for achieving this balance, the company has to implemen t a metrics-based management approach in which teams are measured on strategic performance indicators such as evelopment cost, time to market and customer satisfaction. The definition and selection of the indicators is critical for the successful implementation of the PLM-concept. By setting the weights properly the teams will self-steer to the greatest short- and long-term profit, which results in less coordination effort and efficiency gains especially in the context of for cross- departmental teams. Evaluation Implementation Marketing Management Perspective Perspective Business Plan Implement Plan Technical Implementation Launch Product Go-Live technically Business Case Monitor Manage KPIs Monitor Ensure Product Process Controll Business Case Delivery Finalize 1 3 4 5 6 7 Gate 1 Gate 4 Idea Paper Description Report by Board Innovation- Management Planning Launch Exit Market Technical Financial Perspective Market Capabilities Analysis Technical Evaluation Financial Rating Market Roll-out Planning Develop technical concept Detailing Business Case Market Adjust Business Case Monitor Innovation-Market Exit Technical Exit Business Case 2 Gate 2 3 Gate Gate 5 6 Gate Detailed Design Product Launch Report Mgnt. Approved the Product Fig. 5: PLM-Process based on three principles (4) Lifecycle Value Management Life cycle oriented product planning is a necessity for companies on the competitive market and requires a robust and systematic process combined with the right organizational environment. Enterprises use Lifecycle Value Management to support the management of the product after launch through the growth, maturity, and decline stages of the product life cycle. In the overall value chain, Lifecycle Value Management ensures that the products and services which are developed and implemented fulfill the market requirements and reflect the market demand. Lifecycle Value Management requires permanent attendance for analysing and planning or ensuring the customer benefits and the alignment to all company functions. There are three different but supplementary building blocks of Lifecycle Value Management. PLM and Lifecycle Management Value Reporting Controlling Customer Needs Management Value Oriented Portfolio Management Fig. 6: Three building blocks of Lifecycle Value Management Value orien ted portfolio management (incl. IT-supported portfolio database) Increasing complexity of the product marketing without an appropriate and efficient data foundation will result in a lack of business transparency and low synergies in the value network. The modular structure of the portfolio promotes the use of common parts in the production processes, increasing the ratio mass production to overall production. Strategic alignment and value based product portfolio management enable an effective product lifecycle management. Focusing on clearly defined products makes a significant contribution to effective portfolio management. The products can be positioned without overlaps and in accordance with market demand. Value oriented portfolio management helps to prioritize product investments. Sales and marketing departments benefit from the increased transparency of the product range and he improved comprehensibility for the customers. Reporting and controlling process regarding the product lifecycle management process The referencing of different divisions (sales, resources and production planning; cost/profit accounting, etc. ) to a standard product definition lays the foundation for the application of important controlling instruments (e. g. product success accounting). The unambiguous correlation of the basic data to business management indicators along the lines of a standard product structure provides staff and management with precise and timely information about all of the critical success factors that elp staff and management to make the right decisions at the right time. Customer Needs Management Customer Needs Management incl. Requirement Management builds interface between PLM and Customer Relationship Management (CRM) and gives input for the collaborative product design. The effective Customer Need Management ensures that product content matches customer requirements and allows delivering more personalized products by facilitating mass customization Implementation of these three building blocks combined with a modular product data structure ensures the â€Å"state-of-the art† Lifecycle Value Management: Individual product performance information available at real-time. Product Manager retains product accountability throughout life cycle. Strategy for product growth, maturity, and withdrawal stages is defined up front. Product replacement strategy also considered. Systematic (e. g. annual) review and clean-up/optimization of product portfolio. Supplier and customer are involves in the high collaborative integrated PLM 3 Case Study A renowned company in the telecommunications industry carried out an extensive restructuring program which would enable it to maintain its position in a deregulated market environment. The objective was on the one hand to convert the previously technical driven approach for the product design (i. e. , their orientation towards technical performance features) to an approach focusing on the customers’ needs and requirements. On the other hand, the aim was to develop and implement the integrated management approach, Next Generation PLM. In the initial situation the PLM and the platform was not â€Å"state-of-the-art† (e g. no withdrawal phase, missing of decision gates, long â€Å"time-to-market† etc). A portfolio management process was not designed and implemented. The current portfolio structure was oriented on the rganizational or technical structure and not organized from the customer’s point of view. The product portfolio was characterized by a large number of product variants and features. All these products needed to be handled individually from an IT management perspective. This broad variety of products needed to be realized and im plemented within all operative processes, IT-applications and –systems as well as sales information tools. This led to an enormous complexity that impedes the maintenance of IT-landscape and the management and optimisation of the processes. No integrated IT-solutions ere available at company and at its affiliates. During the project the integrated PLM approach valid for the company and its affiliates was developed. Implementation of Next Generation PLM at this company showed the valuable benefits for solid product development, marketing and strategy: PLM Meta-Model: Easier know how exchange and using of the â€Å"same language† during product development as well as fast and efficient communication between international partner Introduction of the harmonized product definition and product portfolio for all national and international affiliate companies The product portfolios across all of the company ere to be reduced by 50% and integrated into a modular structure. Adop tion of the product data platform at all international subsidiaries PLM Process and Structures Acceleration time-to-market up to 25% by several product groups Efficient cost savings along the PLM process by using standard support system and re-using of modules and components (process costs saving up to 170 m USD/year in the product realization phase) Effective and similar procedure of innovation and market management projects execution PLM IT-Architecture An implemented shared platform for document and project management. One physical server is used to support separate product lifecycle management processes in all divisions and subsidiaries Lifecycle Value Management Sound marketing strategy due to the early recognition of market needs and standardized information More detailed input for controlling for exactly allocation of revenue and costs to products Simpler allocation at cost centres and cost unit Introduction of the harmonized product portfolio for all national and international affiliate companies References [1] Abramovici, M. ; Sieg, O. C. (2002): Status and Development Trends of Product Lifecycle Management Systems. In: Proceeding of International Conference on Integrated Product and Process Development, Wroclaw, Poland, p. 2122. [2] Ausura, B; Deck, M (2007): The new product lifecycle management systems: whar are these PLM systems? and how can they help your company do NPD better? Visions Magazine. Online available at pdma. org/ visions/jan03/plm. html, last visit 26. 01. 2007. [3] 5 Mateika, M. (2005): Unterstutzung der lebenszyklusorientierten Produktplanung am Beispiel des Maschinen- und Anlagenbaus. Essen: Vulkan-Verl. [4] Porter, M. E. (1985): Competitive advantage: Free Press New York. [5] Saaksvuori, A. ; Immonen, A. (2004): Product Lifecycle Management: Springer. [6] Teresko, J. (2004): Auto Report: Information Technology The PLM Revolution. In: Industry Week-CLEVELAND OHIO-, Vol. 253, Nr. 2, p. 32–38. [7] Thoben, K. D. ; Jagdev, H. ; Eschenbaecher, J. (2001): Extended Products: Evolving Traditional Product Concepts. In: Proceedings of the 7 th International Conference on Concurrent Enterprising: Engineering the Knowledge Economy through Co-operation, Bremen, Germany, p. 27–29. [8] Wohler-Moorhoff, Falk; Dieter, Stephan; Schwill, Matthias (2004): Telco 2010. Telekommunikation im Wandel: Die Karten werden neu gemischt. Published by Detecon. Bonn